UHPPOTE Electric Strike Lock 12VDC for Access Control Fire Exit Door Rim Exit Devices for Push Bar

Very reasonable price… second one I’ve installed… door frame typically needs to be cut for it to fit

This electric strike mechanism works VERY well !!! I installed two on a new storage building at my business and find it to be practically flawless. Solid construction and simple installation. The only difficulty was that the size of the mechanism is a little large for the one inch width of the raised portion of the door frame. I had to cut a matching slot into the frame but this only took minutes with a portable sawzall. I'm extremely pleased with this purchase!! Don't forget to buy a 12V door access power supply (made to trigger the latch for a programmable number of seconds). I used a generic K80 door access system power supply for around $12. Nice !!!

Pin quality is not very good

Just what I needed to create a buzz in for a secure door. You can set it for either buzz in or buzz out, and have it fail locked or unlocked in case of power outage... Paired this up with a power supply and a button to complete the system...

It failed after 9 months with a fairly lightly used door (half a dozen actuations/day)I tore it apart: The plunger is press-fit into the solenoid. Over the last nine months, the press-fit loosened enough that the plunger fell out of the solenoid shaft and dropped down inside the latch, causing a fail-open condition.I was able to re-press it with a pair of ChannelLocks - not sure if we'll trust it for tonight or not.Of course - I'm part of the problem: I just ordered two more to replace it. After having cut the door frame so ferociously to custom fit the latch, the frame repair to opt for another brand or style would be a LOT more expensive and more work than just buying two more and hoping for nine more months from each. Not sure I'll ever fully trust them again though!Second failing after 7months. If you haven't already cut your door frame, run away from this!** Update: downgraded to 1 star. On my _7th_ replacement in < 3yrs.

You get what you pay for. Comparable products are about $300, and this product definitely shows why. Construction isn’t very rugged, had lots of problems with it in the first month that required constant tweaking assembley/disassembly. It works, but don’t expect much

arrived quick and works great. Seems better than other products I looked at Amazon

Most affordable panic strike I ever used and its working great so far. Not a true flush mount, but most strikes aren't. After some machining of the door frame, it dropped in beautifully and has been working great. Can easily be changed from NO to NC as pictures show.Jason