Sprayer Wand,Adjustable Universal Sprayer with 3/8" Brass Barb, Stainless Steel Replacement Sprayer Wand with Shut off Valve (3/8" Barb Sprayer Wand)

Seems like it's well built compared to the original wand. Works fine so far with no leaks.

This is an old pump sprayer I was fixing. I needed a clamp-on hose so I bought this one. It fit. it is good quality and has quality parts. For me this was a fantastic buy. My Dad's 30+ year old sprayer is ready for action again.

This product does the job. It charges well and lasts per use. The product doesn't hold the charge for an extended period so you have to recharge if you want to use it the next day. I bought it for the reach of the wand but the problem is that the o ring at the connecting joint leaks. The package has an extra ring but it has the same issue. I think the rings are too thin to handle the pressure/torque due to the length of the wand. I simply wrapped some cloth material around the joint. The leak no longer sprays at me but now drips down the handle.

Great new wand for the price. Attached to a cheap Walmart eliminator 2 gallon tank. Small adapter and clamp fit the hose perfectly. Use plummers tape on all the fittings. Tighten with an adjustable wrench. No leaks. First time sprayed 4 gallons of insecticide mix with no problems.

Made up of stainless steel and brass which is the same material as my Ryobi 1 Gal sprayer wand which started to leak. I was hesistant to order this because I was afraid it might not fit the hose end of my sprayer. I’m glad I did. It fit perfectly but had to take off the 2 fittings at the bottom of the wand. This is cheaper by almost half compared to the replacement wand of my ryobi sprayer.

Assembled easily. Bought new 1/4" ID 1/2" OD braided hose for the supply line and installed on my six year old Petra Tools battery sling sprayer with no leaks anywhere. Sprayed only water to test the new wand. The spray pattern was easily changed from a wide fine mist to a straight stream and everything in between I will find a need for.So far I like it.

The wand as is is useless. The hole in the collar is not large enough to allow the threaded collar to slide down to thread onto the long stainless steel shaft. I will give Amazon one try to correct the issue and send me a replacement. Most people posted positive reviews I was surprised to find zero quality control on this item .update replacement came next day and this one works. Company reached out to me and offered to refund the purchase price. I said no I’m not looking for something for free. They did however ask me to change my review. I can only give them 3stars because of my inconvenience.

There are no instructions with this product. You get an O-Ring but nothing telling you where it goes. I'm assuming it is a spare. The supplied clamps take a 6 mm wrench compared to the 1/4" ones they replaced. I found it hard to tighten the nozzle onto the long tube and get it straight. I also found that the adjustment of the spray pattern from a stream to a mist was very touchy...a very small turn produces a big change.But, the good news is that everything seems to work fine. Once I got everything tight there were no leaks. The trigger works fine and unlike some other people I didn't have any trouble with the trigger lock. The pipe and nozzle is made of stainless steel and it seems to be well machined and pretty sturdy. The valve part is all plastic but it works well and shouldn't break if you treat it with care.Overall I'm glad I bought this as a replacement for the one that came with my sprayer. I think it is much better than the ones that are all plastic or are plastic with a flimsy aluminum tube which is easy to bend or break.

awesome product .solved an issue for me