PUTORSEN 17-49 inch Premium Aluminum Heavy Duty Dual Monitor Arm for Ultrawide Screens up to 44lbs, Vertical Stacked Dual Monitor Desk Mount, Full Motion Dual Vertical Monitor Mount, VESA 75/100,Black

I found the product to be of high quality and fairly easy to install. If you can assemble IKEA furniture, you can handle putting together this dual monitor setup although you may find the instructions comparably frustrating to what comes with that IKEA furniture.I recently purchased a 2nd 32" Dell monitor and wanted to operate dual monitors on on my desk. They were not the same model and had slightly different factory stands so they screens didn't line up perfectly. I also wanted to be able to rotate one of the monitors around so that someone sitting across from my desk could view a screen. Each monitor weighs about 23 lbs so I didn't want to purchase something that was barely rated to handle it. The PETROSEN HD monitor stand seemed to fit the bill pretty well and I'm happy with the purchase after getting it setup.INSTALLATION: The instructions that come with it are almost completely based on diagrams with very little written instruction. That being said, the instructions are fairly intuitive and they only had me guessing a few times. I chose to drill a hole through my desktop as I felt that mounting option would be the sturdiest. Fortunately I was able to drill a hole once and make it work however the base of the mount is about 3" deep x 4" wide so it would conceal mistakes if you needed to relocate it a few inches in any direction. I did manage to brake one of the plastic pieces that helps hide the wires on one of the monitor arms but I may have been able to avoid that if I paid closer attention to the diagram in the instructions. I spent just as much time trying to figure out out how to remove the factory stands from my monitors before attaching the mounting plates to them. The package comes with two Allen keys to do most of the installation steps however I'd recommend also having a Phillips head screwdriver on hand for the assembly.OPERATION: After installation, I had to make very little adjustment to get the monitors aligned and they are holding their position well. It accomplished my goals of aligning the screens while also allowing me to rotate one around for someone sitting opposite my desk. I also have them elevated a little more than where they were positioned with the factory stands which also has freed up some desk surface.OVERALL THOUGHTS: This is a well designed dual monitor stand that can handle some large and heavy screens. It did cost more than several of the options I looked at but they are well built and I don't have concern that my monitor arms will sag our worse yet, topple and cause damage to my monitors. If you are looking for a high quality dual monitor stand, I believe you will be very happy with this one.

I purchased this version and love how solid it mounts to the surface of my desk. The included pole is around 19in tall which didn’t offer quite enough height to stack two ultrawides on top of each other.So I’m using the arms from this kit and the heavy duty 32in pole and desk mount which gave me plenty of clearance for my LG GX9 monitor and Alienware AW3423DW. Gas pistons in the arms are strong and it’s well built. I like the screws that allow you to adjust how much tension there is between the arm and the pole, making it rotate on the pole harder/easier.

The full motion adjustment is smooth and precise — tilt, swivel, and rotation are easy to fine-tune, and the gas spring system holds everything in place perfectly. It’s ideal for multitasking, coding, editing, and maximizing vertical space, especially on smaller desks. The aluminum finish feels premium, and the VESA compatibility (75x75 & 100x100) made setup simple.If you’re looking to optimize your workspace with a vertical stacked monitor setup, this is hands down one of the best mounts available. It’s strong, sleek, and extremely practical. Highly recommended for professionals and power users alike!

Fits Vari Desk! I needed a top clamp mount for the Vari Desk because the back has braces that get in the way of the normal c clamp mount. This stand is super sturdy and holds my 2 29” monitors side by side horizontally. If your monitor has a recessed VESA mount, you’ll need spacers and longer screw. This kit does not include those, but I had them from my old mount. So far I really like this mount a lot.

I like that it supports monitors like the Samsung G9 Odyssey Neo and ASUS ROG Swift PG348Q, even at the same time.I like that it has a fairly good range of motion for the arms. The depth is little bit tricky, but I'd attribute that more to the fact my desk is right up against a wall and window.Setup wasn't too bad. Took a bit of time as I kept misplacing bits and pieces. We'll see in time if I got all the springs and hinges tightened correctly. So far, they're staying in place.What I did wish was different, was the main post. I wish it was about 2-3" taller. A 34" and 49" are too wide for me to put side-by-side, so I have to stack them. It's just once stacked, there isn't a lot of room below the bottom monitor.The main reason I got this stand was to take the 49" off it's original stand so I had more room to move a sound bar further on the desk. But now the bottom monitor is so low that I either have the monitor "rest" on the sound bar or have the soundbar behind the monitor. Putting the sound bar in front defeats the purpose of getting the stand. If the sound bar is positioned directly under the monitor, some buttons on the top of the sound bar are inaccessible and/or I lose some of the desk space I wanted to free up. If the sound bar is behind, while they are "accessible," I can't see them to know which buttons I would be pressing.

The vertical stacking saves so much desk space, and the full-motion adjustments make ergonomic positioning a breeze

The product works flawlessly with my 39’ and 27’ monitors. The install was quite easy, but angling the screens was quite difficult. The only reason this review gets 1 star though is because the first time I ordered this I got sent a unit that looked like it was in a rage room and had a weave in the box, so I obviously had to return it and ended up paying extra to get the exact same product again because it suddenly rose a couple dollars in the day I had sent it back.Edit: Chris from customer service reached out to me to rectify and offered a refund and credit to make up for the inconvenience I had with having to pay more and sending it back. They didn’t ask me to change my review, but I was extremely impressed with their customer service!